RV Tire Safety
with RV tire expert Roger Marble
The dictionary offers this definition of “safety factor”: “The ratio of the maximum stress that a structural part or a piece of material can withstand to the maximum stress estimated for it in the use for which it is designed.”
While that sounds reasonable, it really only works when talking about pieces that fail from simply increasing the load placed on the component.
Items like tires do not really have a “safety factor,” as tires generally do not fail from simply increasing the load too much. In a non-rolling situation, I would not be surprised if we could load tires to 200% or maybe even more than 300% of the load marked on the tire sidewall. However, as soon as you introduce rolling or time or operating temperature, the maximum load before failure is much closer to the max load molded on the tire sidewall. The exception to max speed is affected by temperature, time and load. With zero load many tires can probably handle 200+ mph but, again, for how long and at what temperature?
Since tires are basically a structure made of “organic” components, time and temperature can have a significant impact on the maximum load capabilities of the tire.
If we think of non-organic items like a steel girder or maybe even a stone block as used in the pyramid, we can see that time and normal atmospheric temperatures have essentially no impact on the long-term maximum strength. The exception would be if we were to allow steel to rust or stone to be exposed to water and freeze/thaw cycles.
Tire engineers prefer to use the term “reserve load” when talking about the load capacity of a tire. Here we would find the tire engineer definition as the difference between the tire’s maximum capacity when inflated to the stated level for the specific application (the inflation on the tire placard) and the actual load to be placed on the tire.
Here are a few comparisons:
First, some normal car and truck applications:
What should the reserve load be for your RV? Currently, RVIA considers 10% to be the minimum reserve load. However, the few actual tire engineers that are posting on RV forums are suggesting a MINIMUM reserve load of 15%, with more being desirable.
Read more from Roger Marble on his blog at RVtiresafety.net.