Readers who have been following me know that the Bluetti Elite 200 V2 was my favorite portable power station (and I’ve tried a lot of portable power stations). But notice I used the word “was.” That’s because Bluetti has a new version—the Bluetti Elite 300—and it has now claimed my top spot.
What makes the 300 so much better than the 200? In two words: more power. But beyond that, it’s the ability to plug a 30-amp RV cord directly into it.
Over the years, people have often asked whether I could charge my trailer from my portable power stations. Usually, the answer was no. My power stations could run appliances and devices, but they couldn’t charge the trailer batteries. This one changes that.
That’s right—You can charge your RV directly using the TT-30 port and run your RV devices with the 12V/30A DC output. Keep your fridge, lights, fans, and water pump running while also charging phones, laptops, and routers—all without complicated adapters.
To be fair, my OUPES Mega 2 power station can do that, as well, and it’s also a quality unit. However, I prefer the Bluetti because it takes up slightly less space, and, on a personal note, I like the way the solar panels connect better.
Having that 30-amp connection means you can boondock, recharge the power station with solar panels, use it to recharge your RV batteries, and keep the adventure going.
With the available Charger 2 accessory, which pulls up to 1,200 W from both your vehicle’s alternator and solar panels, you can far outpace a standard 12 V car socket, charging your Elite 300 13 times faster while driving than just the 12 volt plug alone.
For those with older rigs, like mine, that don’t already have solar installed, this portable power station offers an easy, portable, and more affordable solution that can move with you to your next RV.
Bluetti Elite 300 stats
• Battery type: LiFePO₄ (Lithium Iron Phosphate)
• Battery capacity: 3,014.4 Wh (314 Ah)
• Cycle life: 6,000+ cycles to 80% capacity
• Surge power: 4,800W
• Lifting power: 4,800W
• Charging temperature: 32°F to 104°F (0°C to 40°C)
• Discharging temperature: -4°F to 104°F (-20°C to 40°C)
• AC input: 1,800W, 15A max, 120V, 50/60Hz
• Solar input: 1,200W max, 12V–60V, 22A max
Total outlets:
• 4 × Standard AC outlets
• 1 × NEMA TT-30
• 1 × 12V/30A port
• 2 × 15W USB-A
• 1 × 100W USB-C
• 1 × 140W USB-C
• 1 × Cigarette lighter port (120W max)
AC output:
• 2,400W max (discharging)
• 120V, 50/60Hz AC output (bypass)
• 1,800W max, 120/60Hz
What I especially like about the Bluetti Elite 300 portable power station
• Quick charging! When I took this power station out of the box to charge it the first time, it went from 30% to 100% in about two hours on AC using the standard mode, meaning it can charge even quicker if using turbo mode.
• There is even a silent charging mode. It takes a little longer but makes virtually no noise—not that there is much noise in regular mode, but power stations do have fans that come on automatically.
• Power lifting mode allows you to run high-power heating devices, such as hair dryers or electric kettles. While the Elite 300’s actual power output is 2,400W, power lifting mode can handle appliances rated from 2,400W to 4,800W.
• UPS mode allows you to plug the power station into a wall outlet, which powers any appliances plugged into the unit. If the power goes out, those appliances automatically switch to battery power, which is especially useful in places with unstable electricity. You can also personalize this mode with your desired charging and discharging schedule.
• Self-grid adaptation mode automatically adjusts to handle power fluctuations when charging from unstable sources, such as a generator or unreliable grid power.
• The sturdy built-in handles are located on the sides, which means the top of the power station remains flat (unlike some competitors, such as Jackery). That makes it more space-efficient and easier to pack when it’s time to move.
• For the amount of power it provides, this power station is surprisingly compact (though still heavy—see below), measuring just 14.41 × 12.01 × 11.71 inches.
• There are four ways to charge the power station: AC outlet, solar panels, your vehicle’s 12V or 24V outlet, or a traditional generator.
• Control via the device itself or remotely through the app.
• Supports pass-through charging.
• Advanced settings allow you to adjust sleep time, grid self-adaptation mode, ECO mode, and more.
• Comes with a 5-year warranty.
Are there any downsides?
It comes with the territory, but for this much power, a portable power station is going to be heavy. This one weighs in at 57.98 pounds. That said, the sturdy handles and smart design make it manageable. I’m a 60-something woman and can handle it myself. With two people, it’s a breeze.
Also, it’s a minor issue, but it would be nice if Bluetti included the necessary accessories and cords along with a carrying case for them with the power station. Sadly, unlike most other manufacturers, they don’t. So, budget a little extra for the cords and accessories you will need and find a bag to keep them all together.
More information and ordering
RELATED
- BLUETTI Elite 30 V2 portable power station—small, lightweight, and cute
- My new favorite power station: The Bluetti Elite 200 V2 is better than all the others
- Got power stations? You need the Pecron U20 Universal Cable Kit
- Using the powerful and versatile OUPES Mega 2 power station and solar panels
- How to choose the best portable power station for your needs
RVT1263
This is the unit I’ve been waiting for, so I bought it while on-the-road and had it shipped-to-store. The 30 amp outputs are amazing, does everything stated in the article. Indeed it is heavy, thus stays in the truck bed.
I’m aiming for 12 days 24/7 boondocking with 440w/40vdc solar panels before going to an RV park FHU to give it a rest. As of this writing I am on day seven.
Good luck with your undertaking, JDKeets. Safe travels!
Thank you for noting and discussing this highly useful RV accessory, Cheri! Have a great week and safe travels!
as an engineer these make no sense, huge expense to use a separate battery to charge a RV battery. That is why you have a RV battery system with a charging system (generator, solar, campground hookup). added expense just does not make any logical sense. Plus I can add a larger inverter to my truck for less expense (or just use my truck to directly charge the RV battery if I ever needed to).
The weight of this unit is a big problem. I considered it, but purchased a Jackery Explorer 2000 v2 Portable Power Station. Weighs 40 lbs, 2000 Wh capacity, 2200 W output (4400 W surge). It doesn’t have a 30 amp outlet, but neither does the generator I used to use, and the dogbone works fine. Runs our trailer AC over a 4-day weekend without needing a recharge. As a benchmark, it runs our Keurig coffee maker (~1300 w) with a 1% drop in capacity, so we could make 100 cups of coffee with it. Has an app that lets you monitor and control it from your phone. Very quiet also (30 dBA), so no noisy generator.
This unit is rated at IP20 (from the manual spec section) meaning that it has absolutely no protection from water or dust and is only meant to keep you from sticking your fingers in it and getting shocked.
It is an indoor device even though they stuck a 30A receptacle on it.
For RVing, a device rated at IP65 or higher is really needed.
I personally have the Bluetti Pioneer AC240 which is IP65 so I can and do put it outside without worrying about the weather.
So Cheri, when doing these electrical product reviews dig a little deeper beyond the sales pitch they give you.